Location:Home-> ->Detail

Thrust Bearing Maintenance of AVK

|March 29 , 2019

 Thrust Bearing Maintenance of AVK


Thrust bearings must be lubricated using Lubriplate *#930-AA or equivalent. The thrust bearing and mandrel (hex socket head cap screws) are located in the tip of the tool. The bearings should not be dry if they are lubricated as needed. Remove the tip and follow the steps below


QQ截图20190328094257.png


 Remove bearing and hexagon socket screws


QQ截图20190328094315.png


The bearing is separated from the seat ring and  lubricated. Add grease to the bearing. If the screw is worn out, replace the high quality grade 8 

screw.

QQ截图20190328094343.png


                          Reassemble



Please contact our engineers for the right solution.